Tyco Electronics Tyco Electronics

Home < Products < Cable Management Systems < High Density Cable Management and Accessories
High Density Cable Management and Accessories Email This Page | Print This Page
 
Table of Contents
  1. High Density Cable Management and Accessories Information
  2. High Density Vertical Cable Management
  1. High Density Combination Vertical Cable Management
  2. High Density Horizontal Cable Management
  3. High Density Cable Management Accessories
Features & Benefits
  • Two-piece doors feature snap on hinges which allow for quick access from either side or complete removal of doors
  • Six snap-on gates retain cables when doors are open or removed
  • Easy installation - can be done in minutes using standard hand tools
  • Works with EIA-310-D compliant two and four post equipment racks using industry standard mounting holes
  • ¼ inch mounting holes run the full height on both sides of vertical cable managers to accommodate the cable management accessories
  • Vertical cable managers are equipped with:
    • Separator panels with pass through openings
    • Vertical Slots for attaching straps
    • Keyhole slots for attaching spools
  • Front and rear vertical sections can be spaced apart when mounting on racks deeper than 3 inches [76 mm]
  • Vertical cable managers include:
    • Front and rear vertical cabling section
    • four (4) doors
    • six (6) gates
    • fifty (50) push-in fasteners
    • twelve (12) cable strap mounts
    • separator panel and mounting hardware
    • two (2) spool kits (10 inch and 12 inch wide cable managers only)
High Density Vertical Cable Management
  • 1U vertically spaced cable management fingers located front and back
  • Double hinged access doors and cable management gates located front and back
  • Available in 8.5 inch and 11 inch depths
  • Each vertical cable manager is 84 inches high
  • Available in 6, 10 and 12 inch widths
Part Number Descriptions Variation Description Part Numbers
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 8.5 inches, Width 6 inches   1933534-1
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 8.5 inches, Width 10 inches   1933535-1
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 8.5 inches, Width 12 inches   1933536-1
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 11 inches, Width 6 inches   1933537-1
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 11 inches, Width 10 inches   1933538-1
High Density Vertical Cable Management, Double-sided, 48U (84 inches), Depth 11 inches, Width 12 inches   1933539-1
Back to Top
High Density Combination Vertical Cable Management
  • Combination cable managers feature front cable management fingers spaced at 1U for routing of 4-pair cables, and back cable management fingers spaced at 9U for routing of backbone cabling and cable bundles
  • Combination cable managers feature front, double hinged door covers, and rear, removable cable retaining gates
  • Each combination cable manager is 84 inches (45U) high
  • Available in 6, 10 and 12 inch widths
  • Available in 8.5 inch or 11 inch depths
Part Number Descriptions Variation Description Part Numbers
High Density Vertical Cable Management, Combination, double-sided, 48U (84 in), Depth 8.5 inch, Width 6 inch   1933540-1
High Density Vertical Cable Management, Combination, double-sided, 48U (84 in), Depth 8.5 inch, Width 10 inch   1933541-1
High Density Vertical Cable Management, Combination, double-sided, 48U (84 in), Depth 8.5 inch, Width 12 inch   1933542-1
High Density Vertical Cable Manager, Combination, Double-sided, 48U (84 inches), Depth 11 inches, Width 6 inches   1933543-1
High Density Vertical Cable Manager, Combination, Double-sided, 48U (84 inches), Depth 11 inches, Width 10 inches   1933544-1
High Density Vertical Cable Management, Combination, double-sided, 48U (84 inches), Depth 11 inch, Width 12 inch   1933545-1
Back to Top
High Density Horizontal Cable Management
  • Snap-on removable hinged door remains open past 180°
  • #12-24 mounting hardware included
  • Flat black powder coat aluminum with UL94V-0 black plastic components
  • Available in depths of 5.5 and 8.5 inches
Part Number Descriptions Variation Description Part Numbers
High Density Horizontal Cable Management, 1U, single-sided, 5.5 inch Deep   1933530-1
High Density Horizontal Cable Management, 1U, double-sided, 5.5 inch Deep   1933531-1
High Density Horizontal Cable Management, 2U, Single-sided, 5.5 inch Deep   1933532-1
High Density Horizontal Cable Management, 2U, double-sided, 5.5 inch Deep   1933533-1
High Density Horizontal Cable Management, 3U, Single-sided, 5.5 inch Deep   1933561-1
High Density Horizontal Cable Management, 3U, Double-sided, 5.5 inch Deep   1933562-1
High Density Horizontal Cable Management, 1U, Single-sided, 8.5 inch Deep   1933564-1
High Density Horizontal Cable Management, 1U, Double-sided, 8.5 inch Deep   1933565-1
High Density Horizontal Cable Management, 2U, Single-sided, 8.5 inch Deep   1933566-1
High Density Horizontal Cable Management, 2U, Double-sided, 8.5 inch Deep   1933567-1
High Density Horizontal Cable Management, 3U, Single-sided, 8.5 inch Deep   1933568-1
High Density Horizontal Cable Management, 3U, Double-sided, 8.5 inch Deep   1933569-1
Back to Top
High Density Cable Management Accessories
  • Replacement Door Kits:
    • Includes an upper and lower door section
    • Doors are for all high density, vertical, double-sided cable managers
  • Side Cover Panels:
    • Used to cover the side of the high density vertical cable manager at the end of a row of racks
  • Gate Kits:
    • Used on the rear of a combination manager when additional fingers are desired
    • Gate kits are 2U high
    • Gate kits include:
      • 2 - finger sections
      • 1 - gate
      • Mounting hardware
    • UL 94V-0 black plastic components
  • Replacement Gates:
    • Easy installation - gates snap on and can be installed under doors
    • Gates can be opened in either direction and can be quickly removed for easy cable access
    • Replacement gate kits include six (6) gates
    • UL 94V-0 rated black plastic
  • Finger Brackets:
    • High-density finger bracket mounts directly to relay rack and provides cable support at each rack mounting unit
    • Ringers align with rack mounting unit
    • Includes one (1) finger bracket and mounting hardware
    • Flat black powder coat aluminum bracket with UL94V-0 rated black plastic finger section
  • Cable Spools:
    • Spool provides 1.1 inch [28 mm] bend radius
    • Cable spools attach quickly to keyhole slots provided in mounting channels and optional back covers
    • Facilitates storage and routing of cable
    • Unique spool kit design provides for vertical and horizontal adjustability to suit any need
    • Spool kits include two (2) spools and appropriate mounting channels and hardware
    • Flat black powder coat steel with UL94V-0 rated black plastic
  • Fasteners:
    • Used to quickly attach accessories to 1/4 inch [6 mm] mounting holes in cable managers
    • Can be easily removed for relocation
    • Standard packaging includes one hundred (100) pieces
    • White plastic UL94V-2 rated
  • Cable Strap Mounts:
    • Provides attachment for cable straps up to 3/4 inch [19 mm] wide
    • Attach with push-in fastener 1933554-1 to mounting holes in cable managers
    • Standard packaging includes one hundred (100) pieces
    • Black plastic UL94V-0 rated
Part Number Descriptions Variation Description Part Numbers
Gate Kit, 6 inch   1933546-1
Gate Kit, 10 inch   1933547-1
Gate Kit, 12 inch   1933548-1
Replacement Gate, 6 inch   1933549-1
Replacement Gate, 10 inch   1933550-1
Replacement Gate, 12 inch   1933551-1
Finger Bracket   1933552-1
Cable Spools   1933553-1
Fasteners   1933554-1
Cable Strap Mounts   1933555-1
High Density Vertical Cable Manager, Replacement Door Kit, 6 inch   1933556-1
High Density Vertical Cable Manager, Replacement Door Kit, 10 inch   1933557-1
High Density Vertical Cable Manager, Replacement Door Kit, 12 inch   1933558-1
Side Cover Panel Kit   1933563-1
Back to Top
BUY
Catalogs
How to Order
WARRANTY
25 Year Warranty
PART NUMBER SEARCH