Tyco Electronics Tyco Electronics

Home < Products < Optical Fiber Products < Optical Fiber Rack Mount Enclosures and Accessories
Optical Fiber Rack Mount Enclosures and Accessories Email This Page | Print This Page
 
Table of Contents
  1. Snap-in Adapter Plates
  2. MPO Cassettes
  3. MPO SECURE Cassettes
  4. 1U Rack Mount Patch Enclosures
  5. 1U Rack Mount Patch Enclosure with Smooth Sliding Mounting Rails
  6. 1U Rack Mount Patch Enclosures with Swap-able Front Panel and Accessories
  7. 2U Rack Mount Patch Enclosures
  8. 3U Rack Mount Patch Enclosures and Accessories
  9. 4U Rack Mount Patch Enclosures and Accessories
  10. Rack Mount Splice Enclosures
  1. Rack Mount Splice and Patch Enclosure
  2. Splice Trays and Accessories for Rack Mount Splice Enclosures
  3. Rack Mount Fiber Management Enclosures and Accessories
  4. 1U MT-RJ Jack Rack Mount Patch Enclosure
  5. 1U SC and ST Rack Mount Patch Enclosures
  6. 1U LC Rack Mount Patch Enclosures
  7. Accessories for Rack Mount Enclosures
  8. Rack-mount Cable Management
  9. Miscellaneous Cable Management Products
Snap-in Adapter Plates
  • All snap-in adapter plates fit AMP NETCONNECT unloaded optical fiber enclosures (link, link)
  • MT-RJ jack adapter plates
    • Hold up to six MT-RJ (standard or secure) jacks or pigtail jack cable assemblies
    • Accept icons (here)
  • MT-RJ plug adapter plates hold up to twelve MT-RJ plugs (standard only)
  • SL Series discreet adapter plates accept SL Series jacks and multimedia inserts
Part Groups
MT-RJ Snap-in Adapter Plates
LC Snap-in Adapter Plates
SC Snap-in Adapter Plates
SC to ST Snap-in Adapter Plates
ST Snap-in Adapter Plates
Blank Snap-in Adapter Plates
SL Series Discrete Snap-in Adapter Plates
Shuttered LC Adapter Plates
Back to Top
MPO Cassettes
  • Cassette fiber polarity is pair-flipped (AB/BA)
    • Cassettes with straight-through polarity (AB/AB) are available
  • Cassettes have one MPO connection (12-fiber) or two MPO connections (24-fiber) on the back of each cassette
  • Hightest density option uses small form factor connectors (MT-RJ or LC)
  • Cassettes house MPO one or two 12-fiber break-out assemblies
  • Cassettes have the same footprint as snap-in adapter plates which allow them to mount in all AMP NETCONNECT enclosures that accept snap-in adapter plates
  • Cassettes come pre-tested and ready for immediate use
Part Number Descriptions Variation Description Part Numbers
MPO Optical Fiber Cassette, ST, 62.5/125 µm Multimode, 12-Fiber   1278418-2
MPO Optical Fiber Cassette, MT-RJ, 62.5/125 µm Multimode, 12-Fiber   1435005-2
MPO Optical Fiber Cassette, MT-RJ, 62.5/125 µm Multimode, 24-Fiber   1435006-2
MPO Optical Fiber Cassette, MT-RJ, Single-mode, 12-Fiber   1435065-2
MPO Optical Fiber Cassette, MT-RJ, 50/125 µm Multimode, 12-Fiber   1435066-2
MPO Optical Fiber Cassette, ST, 50/125 µm Multimode, 12-Fiber   1435067-2
MPO Optical Fiber Cassette, SC, Single-mode, 12-Fiber   1435069-2
MPO Optical Fiber Cassette, SC, 62.5/125 µm Multimode, 12-Fiber   1435180-2
MPO Optical Fiber Cassette, SC, 50/125 µm Multimode, 12-Fiber   1435181-2
MPO Optical Fiber Cassette, LC, 50/125 µm Multimode, 12-Fiber   1435429-2
MPO Optical Fiber Cassette, LC, 62.5/125 µm Multimode, 12-Fiber   1435430-2
MPO Optical Fiber Cassette, LC, Single-mode, 12-Fiber   1435431-2
MPO Optical Fiber Cassette, LC, 50/125 µm Multimode, 24-Fiber   1435435-2
MPO Optical Fiber Cassette, LC, 62.5/125 µm Multimode, 24-Fiber   1435436-2
MPO Optical Fiber Cassette, LC, Single-mode, 24-Fiber   1435437-2
MPO Optical Fiber Cassette, MT-RJ, XG (850 nm LO 50/125 µm) Multimode, 12-Fiber   1435453-2
MPO Optical Fiber Cassette, MT-RJ, Single-mode, 24-Fiber   1435466-2
MPO Optical Fiber Cassette, MT-RJ, 50/125 µm Multimode, 24-Fiber   1435581-2
Fiber Support Bar Kit, 12 Adapter Plates or MPO Cassettes, for use with 1479359 and 1479360   1479326-1
MPO Optical Fiber Cassette, MT-RJ, XG (850 nm LO 50/125 µm) Multimode, 24-Fiber   1588720-1
MPO Optical Fiber Cassette, SC, XG (850 nm LO 50/125 µm) Multimode, 12-Fiber   1-1695133-1
MPO Optical Fiber Cassette, LC, XG (850 nm LO 50/125 µm) Multimode, 24-Fiber   1754593-2
MPO Optical Fiber Cassette, LC, XG (850 nm LO 50/125 µm) Multimode, 12-Fiber   1754773-2
Back to Top
MPO SECURE Cassettes
  • Cassette fiber polarity is pair-flipped (AB/BA)
  • Cassettes with straight-through polarity (AB/AB) are available
  • Cassettes have one MPO connection (12-fiber) or two MPO connections (24-fiber) on the back of each cassette
  • Cassettes house MPO one or two 12-fiber break-out assemblies
  • Cassettes have the same footprint as snap-in adapter plates which allow them to mount in all AMP NETCONNECT enclosures that accept snap-in adapter plates
  • Cassettes come pre-tested and ready for immediate use
  • MPO SECURE cassettes accept one or two MPO SECURE connectors and transition to the smae color MT-RJ SECURE connectors
  • MPO SECURE plugs mate only with same color MPO SECURE ports
  • For use with MPO SECURE trunk cable assemblies only
Part Number Descriptions Variation Description Part Numbers
MPO SECURE Cassettes, MPO SECURE to MT-RJ SECURE, XG (850 nm LO 50/125 µm) Multimode, 12-Port SECURE Color 1918777-X
MPO SECURE Cassettes, MPO SECURE to MT-RJ SECURE, XG (850 nm LO 50/125 µm) Multimode, 24-Port SECURE Color 1918778-X
MPO SECURE Cassettes, MPO SECURE to LC SECURE, 50/125 µm Multimode, 12-Port SECURE Color 1918779-X
MPO SECURE Cassettes, MPO SECURE to LC SECURE, 50/125 µm Multimode, 24-Port SECURE Color 1918780-X
MPO SECURE Cassettes, MPO SECURE to LC SECURE, 62.5/125 µm Multimode, 6-Port SECURE Color 1918781-X
MPO SECURE Cassettes, MPO SECURE to LC SECURE, 62.5/125 µm Multimode, 24-Port SECURE Color 1918782-X
MPO Cassette/MPO SECURE Cassette, MPO to LC Duplex, XG (850 nm LO 50/125 µm) Multimode, 12-fiber, 6-port Color/SECURE Color 1918783-X
MPO Cassette/MPO SECURE Cassette, MPO to LC, XG (850 nm LO 50/125 µm) Multimode, 24-Fiber, 12-Port Color/SECURE Color 1918784-X
MPO SECURE Optical Fiber Cassette, MT-RJ, 62.5/125 µm Multimode, 12-Fiber Jack/Adapter Color 6754285-X
MPO SECURE Optical Fiber Cassette, MT-RJ, 50/125 µm Multimode, 12-Fiber Jack/Adapter Color 6754286-X
MPO SECURE Optical Fiber Cassette, MT-RJ, 62.5/125 µm Multimode, 24-Fiber Jack/Adapter Color 6754287-X
MPO SECURE Optical Fiber Cassette, MT-RJ, 50/125 µm Multimode, 24-Fiber Jack/Adapter Color 6754288-X
Back to Top
1U Rack Mount Patch Enclosures
  • Accept three (3) snap-in adapter plates or MPO cassettes
  • Slide and tilt drawer
  • Quick release front panel
  • Forward, flush or recessed mounting
  • Fit standard 19 inch racks
  • Include fiber management rings
  • Standard cable enclosure includes cable strain relief
  • Armored and multiple trunk cable enclosure includes:
    • Special design to hold armored or multiple trunk cable in place
    • large rear cable entry with tie down brackets that can be mounted inside or outside of enclosure
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, 1U (1.75 in) x 19 in, Black, for Armored and Trunk Cables, Unloaded   1435555-1
Back to Top
1U Rack Mount Patch Enclosure with Smooth Sliding Mounting Rails
Part Number Descriptions Variation Description Part Numbers
Splice Tray for 1U Rack Mount Enclosure (1-1639192-7)   1639192-1
Optical Fiber Rack Mount Enclosure, 1U (1.75 in) x 19 in, Black, Clear Cover, Unloaded, Flush Mount, Smooth Slides   1-1657014-1
Back to Top
1U Rack Mount Patch Enclosures with Swap-able Front Panel and Accessories
  • 1U drawer-style rack mount enclosure comes with one snap-in adapter plate front panel (standard) and one slime line front panel
  • Snap-in adapter front panel accepts three (3) snap-in adapter plates or three (3) MPO cassettes
  • Slim line front panel allows mix-and-match Cat5e and fiber ports as needed
  • Slide and tilt drawer
  • Quick release front panel
  • Forward, flush or recessed mounting
  • The slim line front panel accepts up to four (4) of either Category 5e 110Connect 6-pack modules or duplex SC adapter plate modules
  • Duplex SC adapter plate modules are for multimode connectors
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Swap-able Front Panel Enclosure Accessory, Category 5e 110Connect 6-Pack Module Kit, for SlimLine Front Panel, Unloaded   1375368-1
Optical Fiber Rack Mount Enclosure, 1U (1.75 in) x 19 in, Black, for Standard Cables, with Swap-able Front Panel, Unloaded   1435040-1
Optical Fiber Rack Mount Swap-able Front Panel Enclosure Accessory, SC Adapter Plate Module Kit (3 Duplex SC Multimode Adapters, 6-Fibers), for SlimLine Front Panel, Unloaded   1435172-1
Back to Top
2U Rack Mount Patch Enclosures
  • Accept up to four (4) snap-in adapter plates or MPO cassettes
  • Removable front and rear covers for easy access and installation
  • Front and rear fiber/cable management rings
  • Edge guard on front cable entries for cable assembly protection
  • Forward, flush or recessed mounting
  • Fit standard 19 inch and 23 inch racks
  • Standard cable enclosure includes cable strain relief
  • Armored and multiple trunk cable enclosure includes:
    • Specially designed to hold armored or multiple trunk cables in place
    • Large rear cable entry with tie down brackets that can be mounted inside or outside of the enclosure
  • Shown loaded with 6-fiber duplex SC snap-in adapter plates (not included)
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, 2U (3.50 in) x 19 in or 23 in, for Standard Cables, Unloaded, Black   559542-2
Optical Fiber Enclosure, Rack Mount, for Armored and Trunk Cables, 2U (3.50 in), 19 in or 23 in, Black   1435556-1
Back to Top
3U Rack Mount Patch Enclosures and Accessories
  • Accept up to eight (8) snap-in adapter plates or MPO cassettes
  • Removable front and rear covers for easy access and installation
  • Front and rear cable management rings
  • Edge guard on front cable entries for cable assembly protection
  • Forward, flush or recessed mounting
  • Fit standard 19-inch and 23-inch racks
  • Standard cable enclosure includes cable strain relief
  • Armored and multiple trunk cable enclosures include:
    • Special design to hold armored or multiple trunk cables in place
    • Large rear cable entry with tie down brackets that can be mounted inside or outside of Enclosure
  • Security kit includes two (2) locks and one (1) aluminum front door (black)
  • Security kit (1435187-2) is for use with 3U enclosures only
  • Shown loaded with 12-fiber MT-RJ snap-in adapter plates (not included)
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, 3U (5.25 in) x 19 in or 23 in, Black, for Standard Cables, Unloaded   559614-2
Optical Fiber Rack Mount 3U Enclosure Accessory, Security Kit   1435187-2
Optical Fiber Enclosure, Rack Mount, for Armored and Trunk Cables, 3U (5.25 in) x 19 in or 23 in, Black   1435557-1
Back to Top
4U Rack Mount Patch Enclosures and Accessories
  • Accepts twelve (12) snap-in adapter plates or MPO cassettes
  • Removable front and rear covers for easy access and installation
  • Front and rear cable management rings
  • Edge guard on front cable entries for cable assembly protection
  • Forward, flush or recessed mounting
  • Standard cable enclosure includes cable strain relief
  • Armored and multiple trunk cable enclosures include:
    • Special design to hold armored or multiple trunk cables in place
    • Large rear cable entry with tie down brackets that can be mounted inside or outside of enclosure
  • Security kit includes two (2) locks and one (1) aluminum front door (1435161-2 is for use with 4U enclosures only)
  • 4U enclosure is shown loaded with 6-fiber ST snap-in adapter plates (not included)
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, 4U (7.00 in) x 19 in or 23 in, for Standard Cables, Unloaded Color 559552-2
Optical Fiber Rack Mount 4U Enclosure Accessory, Security Kit   1435161-X
Optical Fiber Enclosure, Rack Mount, for Armored and Trunk Cables, 4U (7.00 in), 19 in or 23 in, Black   1435558-1
Back to Top
Rack Mount Splice Enclosures
  • Each splice tray holder accepts two (2) splice trays (either 1435839 or 559433)
  • Splice tray holders are located in front of unit allowing cable storage in rear
  • Removable rear and clear front covers for easy access and installation
  • Clear front cover
  • Edge guard on front cable entries for cable assembly protection
  • Fit standard 19-inch and 23-inch racks
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Splice Enclosure, 3U (5.25 in) x 19 in or 23 in, Unloaded Color 559089-X
Optical Fiber Rack Mount Splice Enclosure, 4U (7.00 in) x 19 in or 23 in, Black, Unloaded   559165-2
Back to Top
Rack Mount Splice and Patch Enclosure
  • Accepts up to three (3) snap-in adapter plates or MPO cassettes, and up to six (6) 559433 splice trays
  • Removable front and rear covers for easy access and installation
  • Front and rear cable management rings
  • Edge guard on front cable entries for cable assembly protection
  • Forward, flush or recessed mounting
  • Fit standard 19 inch and 23 inch racks
  • Specially designed to hold armored or multiple trunk cables in place
  • Large side or rear cable entry features tie down brackets that can be mounted inside or outside of enclosure
  • A splicing shelf is located over adapter plates
  • Designed as a drawer for easy access
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Splice and Patch Enclosure, 2U (3.50 in) x 19 in or 23 in   1435652-1
Back to Top
Splice Trays and Accessories for Rack Mount Splice Enclosures
  • Hold up to 12 splices each
  • Used with 2U, 3U and 4U rack mount splice enclosures
  • Accommodates both through (in-line) and end (butt) splice configurations
  • Black anodized aluminum construction for durability and clear plastic tops for improved fiber visibility
  • Each splice tray includes clear plastic cover, end caps for fiber retention, and splice holders as listed
  • Splice and fiber holders are also available separately
Part Number Descriptions Variation Description Part Numbers
Splice Holder, for Fusion and Elastomeric Splices   503085-1
Splice Holder, for Fusion Splices   503086-1
Splice Holder, for CORELINK Splices   559066-1
Fiber Holder for use with Optical Fiber Splicing   559532-1
Splice Trays and Accessories for Rack Mount Splice Enclosures, Splice Tray Compatible Splice 1435839-X
Back to Top
Rack Mount Fiber Management Enclosures and Accessories
  • Holds excess loops of fiber cable or patch cords
  • Drawer style
  • Cable management loops included
  • 2U (3.50") high
Part Number Descriptions Variation Description Part Numbers
Rack Mount Fiber Management Enclosure, 2U (3.50 in) x 19 in, Black   1435808-1
Back to Top
1U MT-RJ Jack Rack Mount Patch Enclosure
  • 1U (1.75"), 48-fiber rack mount enclosure high density solution
  • Loaded with housings for MT-RJ patch panel jacks
  • Holds up to twenty-four (standard or secure) MT-RJ patch panel jacks or MT-RJ pigtail jack cable assemblies (each type purchased separately)
  • Slide and tilt drawer
  • Quick release front panel
  • Cable strain relief and management rings included
  • Forward, flush or recessed mounting
  • Fit standard TIA 19-inch racks
  • Accepts icons for identification
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, for MT-RJ Patch Panel Jacks, 1U (1.75 in) x 19 in, Black, Unloaded Color 1206704-X
Back to Top
1U SC and ST Rack Mount Patch Enclosures
  • Enclosures pre-loaded with SC or ST adapters
  • Slide and tilt drawer
  • Quick release front panel
  • Cable strain relief and management rings included
  • Forward, flush or recessed mounting
  • Fit standard TIA 19-inch racks
  • Each enclosure will accept up to two (2) 559433 splice trays
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, ST, Multimode, 1U (1.75 in) x 19 in Fiber Count/Number of Couplers 1206114-X
Optical Fiber Rack Mount Enclosure, SC, Multimode, 1U (1.75 in) x 19 in Fiber Count 1206138-X
Optical Fiber Rack Mount Enclosure, SC, Single-mode, 1U (1.75 in) x 19 in Fiber Count 1348960-X
Back to Top
1U LC Rack Mount Patch Enclosures
  • Enclosures pre-loaded with LC adapters
  • Slide and tilt drawer
  • Quick release front panel
  • Cable strain relief and management rings included
  • Forward, flush or recessed mounting
  • Fit standard TIA 19-inch racks
  • Each enclosure will accept up to two (2) 559433 splice trays
Part Number Descriptions Variation Description Part Numbers
Optical Fiber Rack Mount Enclosure, LC, Multimode, 1U (1.75 in) x 19 in Fiber Count/Fiber Type 1671000-X
Back to Top
Accessories for Rack Mount Enclosures
Part Number Descriptions Variation Description Part Numbers
Accessories for Rack Mount Enclosures, Cable Strain Relief, 3.5 - 8 mm   1206144-1
Accessories for Rack Mount Enclosures, Cable Strain Relief, 9 - 14 mm   1206145-1
Accessories for Rack Mount Enclosures, Fiber Management Ring Kit   1206146-1
Back to Top
Rack-mount Cable Management
  • Rack-mount cable management solutions for twisted pair and optical fiber products
Part Groups
Finger Duct Panels
Rack Mount Ringed Cable Management
Cable Support and Rear Cable Management
High Density Cable Management and Accessories
Back to Top
Miscellaneous Cable Management Products
Part Groups
VELCRO Cable Ties
AMP-TY Nylon Cable Ties
Back to Top
LEARN
Data Sheets
BUY
Catalogs
How to Order
WARRANTY
25 Year Warranty
PART NUMBER SEARCH