Flexible conduit connectors are designed for connecting 9.53 mm [3/8"] and 12.70 mm [1/2"] trade size flexible conduit - Greenfield types - to electrical panels or boxes. They provide fast, reliable connectors in a variety of applications.
Connecting flexible conduit using AMP NETCONNECT straight-thru or right-angle connectors is easy. A connector is simply screwed onto the conduit until it stops, then the connector is snapped into the knockout hole of a panel or box. No screw clamps are needed to hold the conduit in the connector, and no locknut is needed to retain the connector in the panel or box.
Rated 125° C [257° F]
Fully grounded
UL Listed for use on 9.53 mm [3/8"] flexible conduit. UL file number: E60108
Recognized under the Component Program of Underwriters Laboratories, Inc. for use on 12.7 mm [1/2"] flexible conduit. UL file number: E60108
Designed to UL performance Standard 514B
Certified by Canadian Standards Association (CSA), report numbers: LR42374-1 and LR38656-1
The AMP NETCONNECT Non-Metallic (NM) Sheathed Cable Interconnections provide a fast and reliable way to permanently interconnect 3.23 or 2.07 mm² (12 and 14 AWG) circuits. They eliminate the need for junction boxes, covers, wire nuts and box connectors.
NM Cable Splices and Taps use insulation displacement contacts (IDC) and require no special tools for termination.
Voltage rating - 300 VAC RMS
Current Rating - 20 Amperes
Temperature rating - 105°C
Meets requirements of NEC 2002 articles 545, 550, 551 and 334-40B (Tap and 3-Wire Interconnection)
UL Listed, file number - E57250
3-Wire Tap
3-Wire (2 Conductors and Ground) Tap for tapping into 3.23 or 2.07mm² (12 or 14 AWG) solid, sheathed, 3-wire cable
Tap mates with 3-Wire (2 Conductors and Ground) Splice part number 1116377-X to complete Tap Assembly
Instruction sheet - 408-6548
3-Wire Splice
3-Wire (2 Conductors and Ground) Splice connector for splicing 3.23 or 2.07mm² (12 or 14 AWG) solid, sheathed, 3-wire cable
Tap mates with 3-Wire Splice to complete Tap and Splice Assembly
Instruction Sheet - 408-7913
4-Wire Splice
4-Wire (3 Conductors and Ground) Splice connector for splicing 3.23 or 2.07mm (12 or 14 AWG) solid, sheathed, 4-wire cable
Instruction Sheet - 408-6571
Note: Two splice connectors are required for each interconnection to splice two cables together
New Products
